Custom Mod Seitona Seiko Chronograph VK63 Mecha-Quartz Black Dial Homage
Custom Mod "Seitona" Seiko Chronograph VK63 Mecha-Quartz Black Dial Daytona Homage. All my watches are brand new and hand built with passion. For my Seiko custom mods, I only use Seiko movements, with Seiko and aftermarket products, to design and craft beautiful time pieces for you. Plus it adds to the unboxing experience, many buyers seem to enjoy, however, this may have an adverse effect on photos, appearing as imperfections. This is likely an illusion caused. O by the plastic, but if you see of any that are of concern, please message us, we do try our best to reply within a couple hours. Custom Mod Seiko Daytona Homage "Seitona" with Black Dial on an "OysterFlex" like (rubber/silicone) Bracelet.
CASE MATERIALS: 904L Stainless Steel. LUG TO LUG: 48 mm. DIAL: Black w/ 3 (working) Sub Dials.
LUMIBRITE: Bright Green On Hands & Indexes (see photo). BAND MATERIAL: Rubber-Silicone "OysterFlex Styled". CLASP: Double Locking Foldover Clasp (similar to Oysterlock Clasp). WATER RESISTANCE: 3ATM (30 meters).SCREWED DOWN PARTS: Crown, CaseBack, Chrono Pushers. TYPE: Mecha-Quartz - Hybrid movement, uses quartz technology for time main time keeping functions and a mechanical module to operate the chronograph. Best of both worlds, keeps extremely accurate time, while the chrono second hand elegantly sweeps around the dial. FUNCTIONS: Hours, Minutes, Small Seconds, Central Chronograph Seconds, 60 minute counter, 24 Hour Indicator.
ACCURACY: Less than +/- 20 seconds per month at normal temps. EXPECTED BATTERY LIFE: 3 Years with normal usage.
Using the chronograph more will drain the battery more, thus shortening this timeframe. Hand Assembled in USA w/ Globally Sourced Materials. ++> HOW TO SET THE TIME. 3 Turn the crown to set the hour and minute hand. 5 Push in the crown to the normal position.
If the crown is pulled to the second position while the chronograph is started, the chronograph hands will continue to move. This is not a malfunction. 2 Turn the crown clockwise to set the date. If it is necessary to set the date during that time, first change the hands to any time outside of that range; then set the date and then reset the correct time. (Use the 24 hours sub-dial located at 3 o'clock to help you when setting the date).
3 Screw in the crown to the normal position. 1 To start the chronograph: press the upper pusher. The chronograph hands will begin to move.
2 To stop the chronograph: press the upper pusher again. The chronograph hands will stop and indicate the elapsed time.
Read the elapsed seconds on the large central hand and minutes on the sub-dial in the 9 o'clock position. 3 To reset the chronograph: press button the lower pusher to reset the chronograph. All the chronograph hands will be reset to "0" position. ++> USING THE TACHYMETER SCALE. The tachymeter scale can be used to compute a speed based on travel time.
The tachymeter can also be used or measure distance based on speed. To use the tachymeter for measuring speed: start the chronograph at the beginning of a 1-kilometer or 1-mile distance. At the end of the distance, the point on the scale next to the second hand indicates your speed.
To measure distance: while traveling at a constant speed, the tachymeter can also be used to measure distance. Start the chronograph at the beginning of the length to be measured.
When the second-hand reaches the point on the tachymeter scale where the speed indicated equals the speed of the vehicle, one unit of distance miles if speed is miles per hour, kilometers if kilometers per hour, etc. For example, if you travel at a constant 80 mph (or at 80 km/h), then the distance traveled while the second-hand sweeps to "80" (45 seconds) will be exactly 1 mile at 80 mph (or 1 kilometer at 80 km/h). Please return the watch in the same condition as you received it. Our new cutoff time for same day is now 8am (Pacific).Coverages are at least the sales price.